Difference between revisions of "Apache Configuration"
From Harding Wiki
Jump to navigationJump to search
PeterHarding (talk | contribs) |
PeterHarding (talk | contribs) m |
||
| Line 1: | Line 1: | ||
= CVS = | = Apache Configurations on CVS.pha.com.au = | ||
== 000-default == | == 000-default == | ||
Revision as of 01:34, 16 April 2007
Apache Configurations on CVS.pha.com.au
000-default
NameVirtualHost *
<VirtualHost *>
ServerAdmin webmaster@localhost
DocumentRoot /var/www/
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
<Directory /var/www/>
Options Indexes FollowSymLinks MultiViews
AllowOverride None
Order allow,deny
allow from all
# This directive allows us to have apache2's default start page
# in /apache2-default/, but still have / go to the right place
RedirectMatch ^/$ /apache2-default/
</Directory>
ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/
<Directory "/usr/lib/cgi-bin">
AllowOverride None
Options ExecCGI -MultiViews +SymLinksIfOwnerMatch
Order allow,deny
Allow from all
</Directory>
ErrorLog /var/log/apache2/error.log
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
CustomLog /var/log/apache2/access.log combined
ServerSignature On
Alias /doc/ "/usr/share/doc/"
<Directory "/usr/share/doc/">
Options Indexes MultiViews FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
Allow from 127.0.0.0/255.0.0.0 ::1/128
</Directory>
</VirtualHost>
001-default
root@cvs:/etc/apache2/sites-enabled# cat 001-default-ssl
# virtual host only port 443
NameVirtualHost 203.3.69.37:443
<VirtualHost cvs.pha.com.au:443>
# SSL Engine Switch:
# Enable/Disable SSL for this virtual host.
SSLEngine on
# SSL Cipher Suite:
# List the ciphers that the client is permitted to negotiate.
# See the mod_ssl documentation for a complete list.
SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL
# Server Certificate:
# Point SSLCertificateFile at a PEM encoded certificate. If
# the certificate is encrypted, then you will be prompted for a
# pass phrase. Note that a kill -HUP will prompt again. Keep
# in mind that if you have both an RSA and a DSA certificate you
# can configure both in parallel (to also allow the use of DSA
# ciphers, etc.)
SSLCertificateFile /etc/apache2/ssl/cvs.crt
#SSLCertificateFile /etc/apache2/ssl.crt/server-dsa.crt
# Server Private Key:
# If the key is not combined with the certificate, use this
# directive to point at the key file. Keep in mind that if
# you've both a RSA and a DSA private key you can configure
# both in parallel (to also allow the use of DSA ciphers, etc.)
SSLCertificateKeyFile /etc/apache2/ssl/cvs.key
#SSLCertificateKeyFile /etc/apache2/ssl.key/server-dsa.key
# Server Certificate Chain:
# Point SSLCertificateChainFile at a file containing the
# concatenation of PEM encoded CA certificates which form the
# certificate chain for the server certificate. Alternatively
# the referenced file can be the same as SSLCertificateFile
# when the CA certificates are directly appended to the server
# certificate for convinience.
#SSLCertificateChainFile /etc/apache2/ssl.crt/ca.crt
# Certificate Authority (CA):
# Set the CA certificate verification path where to find CA
# certificates for client authentication or alternatively one
# huge file containing all of them (file must be PEM encoded)
# Note: Inside SSLCACertificatePath you need hash symlinks
# to point to the certificate files. Use the provided
# Makefile to update the hash symlinks after changes.
#SSLCACertificatePath /etc/apache2/ssl.crt
#SSLCACertificateFile /etc/apache2/ssl.crt/ca-bundle.crt
# Certificate Revocation Lists (CRL):
# Set the CA revocation path where to find CA CRLs for client
# authentication or alternatively one huge file containing all
# of them (file must be PEM encoded)
# Note: Inside SSLCARevocationPath you need hash symlinks
# to point to the certificate files. Use the provided
# Makefile to update the hash symlinks after changes.
#SSLCARevocationPath /etc/apache2/ssl.crl
#SSLCARevocationFile /etc/apache2/ssl.crl/ca-bundle.crl
# Client Authentication (Type):
# Client certificate verification type and depth. Types are
# none, optional, require and optional_no_ca. Depth is a
# number which specifies how deeply to verify the certificate
# issuer chain before deciding the certificate is not valid.
#SSLVerifyClient require
#SSLVerifyDepth 10
# Access Control:
# With SSLRequire you can do per-directory access control based
# on arbitrary complex boolean expressions containing server
# variable checks and other lookup directives. The syntax is a
# mixture between C and Perl. See the mod_ssl documentation
# for more details.
#<Location />
#SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
# and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
# and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
# and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
# and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
# or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
#</Location>
# SSL Engine Options:
# Set various options for the SSL engine.
# o FakeBasicAuth:
# Translate the client X.509 into a Basic Authorisation. This means that
# the standard Auth/DBMAuth methods can be used for access control. The
# user name is the `one line' version of the client's X.509 certificate.
# Note that no password is obtained from the user. Every entry in the user
# file needs this password: `xxj31ZMTZzkVA'.
# o ExportCertData:
# This exports two additional environment variables: SSL_CLIENT_CERT and
# SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
# server (always existing) and the client (only existing when client
# authentication is used). This can be used to import the certificates
# into CGI scripts.
# o StdEnvVars:
# This exports the standard SSL/TLS related `SSL_*' environment variables.
# Per default this exportation is switched off for performance reasons,
# because the extraction step is an expensive operation and is usually
# useless for serving static content. So one usually enables the
# exportation for CGI and SSI requests only.
# o CompatEnvVars:
# This exports obsolete environment variables for backward compatibility
# to Apache-SSL 1.x, mod_ssl 2.0.x, Sioux 1.0 and Stronghold 2.x. Use this
# to provide compatibility to existing CGI scripts.
# o StrictRequire:
# This denies access when "SSLRequireSSL" or "SSLRequire" applied even
# under a "Satisfy any" situation, i.e. when it applies access is denied
# and no other module can change it.
# o OptRenegotiate:
# This enables optimized SSL connection renegotiation handling when SSL
# directives are used in per-directory context.
#SSLOptions +FakeBasicAuth +ExportCertData +CompatEnvVars +StrictRequire
<Files ~ "\.(cgi|shtml|phtml|php3?)$">
SSLOptions +StdEnvVars
</Files>
<Directory "/usr/lib/cgi-bin">
SSLOptions +StdEnvVars
</Directory>
# SSL Protocol Adjustments:
# The safe and default but still SSL/TLS standard compliant shutdown
# approach is that mod_ssl sends the close notify alert but doesn't wait for
# the close notify alert from client. When you need a different shutdown
# approach you can use one of the following variables:
# o ssl-unclean-shutdown:
# This forces an unclean shutdown when the connection is closed, i.e. no
# SSL close notify alert is send or allowed to received. This violates
# the SSL/TLS standard but is needed for some brain-dead browsers. Use
# this when you receive I/O errors because of the standard approach where
# mod_ssl sends the close notify alert.
# o ssl-accurate-shutdown:
# This forces an accurate shutdown when the connection is closed, i.e. a
# SSL close notify alert is send and mod_ssl waits for the close notify
# alert of the client. This is 100% SSL/TLS standard compliant, but in
# practice often causes hanging connections with brain-dead browsers. Use
# this only for browsers where you know that their SSL implementation
# works correctly.
# Notice: Most problems of broken clients are also related to the HTTP
# keep-alive facility, so you usually additionally want to disable
# keep-alive for those clients, too. Use variable "nokeepalive" for this.
# Similarly, one has to force some clients to use HTTP/1.0 to workaround
# their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
# "force-response-1.0" for this.
SetEnvIf User-Agent ".*MSIE.*" \
nokeepalive ssl-unclean-shutdown \
downgrade-1.0 force-response-1.0
# Per-Server Logging:
# The home of a custom SSL log file. Use this when you want a
# compact non-error SSL logfile on a virtual host basis.
CustomLog /var/log/apache2/ssl_request_log \
"%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
# General setup for the virtual host
ServerName cvs.pha.com.au:443
ServerAdmin webmaster@localhost
DocumentRoot /var/www/
<Directory />
# ben. user authorization required across the entire virtual host
AuthType Basic
AuthName "PHA"
AuthUserFile /u/www/passwords/cvs.users.htpasswd
Require valid-user
# phakt.pha.com.au
Allow from 203.3.69.33
# Cellestis
Allow from 61.9.145.182
Deny from All
# either username / password OR clients from inside the LAN (via phakt) allowed
Satisfy Any
Options FollowSymLinks
AllowOverride None
</Directory>
<Directory /var/www/>
AuthType Basic
AuthName "PHA"
AuthUserFile /u/www/passwords/cvs.users.htpasswd
Require valid-user
Options Indexes FollowSymLinks MultiViews
AllowOverride None
Order allow,deny
# This directive allows us to have apache2's default start page
# in /apache2-default/, but still have / go to the right place
# RedirectMatch ^/$ /apache2-default/
</Directory>
ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/
<Directory "/usr/lib/cgi-bin">
AllowOverride None
Options ExecCGI -MultiViews +SymLinksIfOwnerMatch
Order allow,deny
Allow from all
</Directory>
ErrorLog /var/log/apache2/ssl_error.log
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
CustomLog /var/log/apache2/ssl_access.log combined
ServerSignature On
Alias /icons/ "/usr/share/apache2/icons/"
<Directory "/usr/share/apache2/icons">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
# ben. Fri, 22 Oct 2004 13:01:20 +1000
# TODO could move to separate site file ala default
#
Alias /wiki/ "/usr/share/moin/htdocs/"
# ben. Sun, 31 Oct 2004 12:02:10 +1100
# Debian says this is a standard installation location
# /usr/share/doc/moin/README.Debian
# ScriptAlias /PHAWiki "/var/local/lib/wiki/moin.cgi"
# ben. we put everything under /u/
ScriptAlias /Wiki "/u/www/htdocs/wiki/moin.cgi"
ScriptAlias /CVS "/usr/lib/cgi-bin/viewcvs.cgi"
<Directory /home>
# <Directory /home/*/public_html>
AllowOverride All
</Directory>
AddHandler cgi-script .cgi
Alias /default/ "/u/www/sites/bugzilla/default/"
Alias /allwell/ "/u/www/sites/bugzilla/allwell/"
Alias /cellestis/ "/u/www/sites/bugzilla/cellestis/"
Alias /raa/ "/u/www/sites/bugzilla/allwell/"
Alias /sds/ "/u/www/sites/bugzilla/sds/"
Alias /tabcorp/ "/u/www/sites/bugzilla/tabcorp/"
Alias /vemco/ "/u/www/sites/bugzilla/vemco/"
Alias /pha/ "/u/www/sites/bugzilla/pha/"
Alias /new/ "/u/www/sites/bugzilla/new/"
<Directory "/u/www/sites/bugzilla/allwell/">
AuthType Basic
AuthName "Bugzilla Repository"
AuthUserFile /u/www/passwords/cvs.users.htpasswd
Require valid-user
Options Indexes Includes FollowSymLinks ExecCGI
AllowOverride None
Order allow,deny
</Directory>
<Directory "/u/www/sites/bugzilla/cellestis/">
AuthType Basic
AuthName "Bugzilla Repository"
AuthUserFile /u/www/passwords/cvs.users.htpasswd
Require valid-user
Options Indexes Includes FollowSymLinks ExecCGI
AllowOverride None
Order allow,deny
</Directory>
<Directory "/u/www/sites/bugzilla/pha/">
AuthType Basic
AuthName "Bugzilla Repository"
AuthUserFile /u/www/passwords/cvs.users.htpasswd
Require valid-user
Options Indexes Includes FollowSymLinks ExecCGI
AllowOverride None
Order allow,deny
</Directory>
<Directory "/u/www/sites/bugzilla/sds/">
AuthType Basic
AuthName "Bugzilla Repository"
AuthUserFile /u/www/passwords/cvs.users.htpasswd
Require valid-user
Options Indexes Includes FollowSymLinks ExecCGI
AllowOverride None
Order allow,deny
</Directory>
<Directory "/u/www/sites/bugzilla/tabcorp/">
Options Indexes Includes FollowSymLinks ExecCGI
AllowOverride None
Order allow,deny
Allow from all
</Directory>
<Directory "/u/www/sites/bugzilla/vemco/">
Options Indexes Includes FollowSymLinks ExecCGI
AllowOverride None
Order allow,deny
Allow from all
</Directory>
<Directory "/u/www/sites/bugzilla/new/">
Options Indexes Includes FollowSymLinks ExecCGI
AllowOverride AuthConfig
AuthType Basic
AuthName "New Test Bug Database"
AuthUserFile /usr/local/apache/conf/bugzilla.users
Require valid-user
#Allow from pha.com.au
#Satisfy any
</Directory>
<Location /svn>
DAV svn
SVNPath /u/svn/
AuthzSVNAccessFile /u/svn/.svn-policy-file
AuthName "PerformIQ SVN"
AuthType Basic
AuthUserFile /u/www/passwords/cvs.users.htpasswd
Satisfy Any
Require valid-user
</Location>
</VirtualHost>
005-admindev.pha.com.au-ssl
root@cvs:/etc/apache2/sites-enabled# cat 005-admindev.pha.com.au-ssl
#-------------------------------------------------------------------------------
<VirtualHost admindev.pha.com.au:443>
# General setup for the virtual host
ServerName admindev.pha.com.au
DocumentRoot /u/www/pha/prod/admin
ServerAdmin plh@pha.com.au
# ben. do not use these for the moment
# ErrorLog /u/www/pha/logs/admin_ssl_error.log
# TransferLog /u/www/pha/logs/admin_ssl_access.log
ScriptAlias /cgi-bin/ "/u/www/pha/cgi-bin/"
ScriptAlias /py/ "/u/www/pha/prod/admin/py/"
Alias /classes/ "/u/www/pha/classes/"
Alias /tqau/ "/u/www/tq/au/htdocs/"
Alias /tqnz/ "/u/www/tq/nz/htdocs/"
Alias /info/ "/u/www/pha/prod/info/"
Alias /pha/ "/u/www/pha/prod/pha/php/"
Alias /php/ "/u/www/pha/prod/pha/php/"
Alias /css/ "/u/www/pha/prod/admin/css/"
Alias /js/ "/u/www/pha/prod/admin/js/"
Alias /includes/ "/u/www/pha/prod/pha/includes/"
Alias /uploadImages/ "/u/www/pha/prod/pha/uploadImages/"
Alias /downloads/ "/u/www/pha/downloads/"
Alias /papers/ "/u/www/pha/papers/"
Alias /images/ "/u/www/pha/prod/pha/images/"
# ben. this does not work
# Alias /pha/images/ "/u/www/pha/prod/pha/pha/images/"
#Alias /olof-dev/ "/home/pha/olof/library/"
<Directory /u/www/pha/prod/admin>
# Options FollowSymLinks
AllowOverride AuthConfig
#Options ExecCGI Indexes FollowSymLinks
Options ExecCGI FollowSymLinks
AddHandler cgi-script .py
</Directory>
<Directory "/u/www/tq/au/htdocs">
Options Indexes FollowSymLinks
AuthUserFile "/usr/local/etc/apache/users/pha.admin"
AuthName "TQAU Authorisation"
AuthType Basic
Require valid-user
AllowOverride None
# AllowOverride AuthConfig
# Order allow,deny
# Allow from all
</Directory>
<Directory "/u/www/tq/nz/htdocs">
Options Indexes FollowSymLinks
AuthUserFile "/usr/local/etc/apache/users/pha.admin"
AuthName "TQAU Authorisation"
AuthType Basic
Require valid-user
AllowOverride None
</Directory>
######################################
#
# PHA access directives for the admin directory
# top level editing and new page creation/deletion
<Directory "/u/www/pha/prod/pha/php/admin">
AuthUserFile "/usr/local/etc/apache/users/phausers.txt"
AuthGroupFile "/usr/local/etc/apache/users/phagroups.txt"
AuthName "PHA Authorisation"
AuthType Basic
<Limit GET POST>
# anyone from the pha group can see this directory
require group level1 level2
</Limit>
</Directory>
#
# PHA access directives for the admin/level1 directory
# top level editing and new page creation/deletion
<Directory "/u/www/pha/prod/pha/php/admin/level1">
AuthUserFile "/usr/local/etc/apache/users/phausers.txt"
AuthGroupFile "/usr/local/etc/apache/users/phagroups.txt"
AuthName "Level 1 Authorisation"
AuthType Basic
<Limit GET POST>
# add level 1 usernames here as they appear in phausers.txt
require group level1
</Limit>
</Directory>
#
# PHA access directives for the admin/level2 directory - everyone else
# page editing
<Directory "/u/www/pha/prod/pha/php/admin/level2">
AuthUserFile "/usr/local/etc/apache/users/phausers.txt"
AuthGroupFile "/usr/local/etc/apache/users/phagroups.txt"
AuthName "Level 2 Authorisation"
AuthType Basic
<Limit GET POST>
require group level1 level2
</Limit>
</Directory>
##########################################
<Directory "/u/www/pha/prod/admin/js/">
Options Indexes FollowSymLinks
AllowOverride AuthConfig
Order allow,deny
Allow from all
</Directory>
# SSL Engine Switch:
# Enable/Disable SSL for this virtual host.
SSLEngine on
# SSL Cipher Suite:
# List the ciphers that the client is permitted to negotiate.
# See the mod_ssl documentation for a complete list.
SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL
# Server Certificate:
# Point SSLCertificateFile at a PEM encoded certificate. If
# the certificate is encrypted, then you will be prompted for a
# pass phrase. Note that a kill -HUP will prompt again. Keep
# in mind that if you have both an RSA and a DSA certificate you
# can configure both in parallel (to also allow the use of DSA
# ciphers, etc.)
SSLCertificateFile /etc/apache2/ssl/cvs.crt
#SSLCertificateFile /etc/apache2/ssl.crt/server-dsa.crt
# Server Private Key:
# If the key is not combined with the certificate, use this
# directive to point at the key file. Keep in mind that if
# you've both a RSA and a DSA private key you can configure
# both in parallel (to also allow the use of DSA ciphers, etc.)
SSLCertificateKeyFile /etc/apache2/ssl/cvs.key
#SSLCertificateKeyFile /etc/apache2/ssl.key/server-dsa.key
# Server Certificate Chain:
# Point SSLCertificateChainFile at a file containing the
# concatenation of PEM encoded CA certificates which form the
# certificate chain for the server certificate. Alternatively
# the referenced file can be the same as SSLCertificateFile
# when the CA certificates are directly appended to the server
# certificate for convinience.
#SSLCertificateChainFile /etc/apache2/ssl.crt/ca.crt
# Certificate Authority (CA):
# Set the CA certificate verification path where to find CA
# certificates for client authentication or alternatively one
# huge file containing all of them (file must be PEM encoded)
# Note: Inside SSLCACertificatePath you need hash symlinks
# to point to the certificate files. Use the provided
# Makefile to update the hash symlinks after changes.
#SSLCACertificatePath /etc/apache2/ssl.crt
#SSLCACertificateFile /etc/apache2/ssl.crt/ca-bundle.crt
# Certificate Revocation Lists (CRL):
# Set the CA revocation path where to find CA CRLs for client
# authentication or alternatively one huge file containing all
# of them (file must be PEM encoded)
# Note: Inside SSLCARevocationPath you need hash symlinks
# to point to the certificate files. Use the provided
# Makefile to update the hash symlinks after changes.
#SSLCARevocationPath /etc/apache2/ssl.crl
#SSLCARevocationFile /etc/apache2/ssl.crl/ca-bundle.crl
# Client Authentication (Type):
# Client certificate verification type and depth. Types are
# none, optional, require and optional_no_ca. Depth is a
# number which specifies how deeply to verify the certificate
# issuer chain before deciding the certificate is not valid.
#SSLVerifyClient require
#SSLVerifyDepth 10
# Access Control:
# With SSLRequire you can do per-directory access control based
# on arbitrary complex boolean expressions containing server
# variable checks and other lookup directives. The syntax is a
# mixture between C and Perl. See the mod_ssl documentation
# for more details.
#<Location />
#SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
# and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
# and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
# and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
# and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
# or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
#</Location>
# SSL Engine Options:
# Set various options for the SSL engine.
# o FakeBasicAuth:
# Translate the client X.509 into a Basic Authorisation. This means that
# the standard Auth/DBMAuth methods can be used for access control. The
# user name is the `one line' version of the client's X.509 certificate.
# Note that no password is obtained from the user. Every entry in the user
# file needs this password: `xxj31ZMTZzkVA'.
# o ExportCertData:
# This exports two additional environment variables: SSL_CLIENT_CERT and
# SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
# server (always existing) and the client (only existing when client
# authentication is used). This can be used to import the certificates
# into CGI scripts.
# o StdEnvVars:
# This exports the standard SSL/TLS related `SSL_*' environment variables.
# Per default this exportation is switched off for performance reasons,
# because the extraction step is an expensive operation and is usually
# useless for serving static content. So one usually enables the
# exportation for CGI and SSI requests only.
# o CompatEnvVars:
# This exports obsolete environment variables for backward compatibility
# to Apache-SSL 1.x, mod_ssl 2.0.x, Sioux 1.0 and Stronghold 2.x. Use this
# to provide compatibility to existing CGI scripts.
# o StrictRequire:
# This denies access when "SSLRequireSSL" or "SSLRequire" applied even
# under a "Satisfy any" situation, i.e. when it applies access is denied
# and no other module can change it.
# o OptRenegotiate:
# This enables optimized SSL connection renegotiation handling when SSL
# directives are used in per-directory context.
#SSLOptions +FakeBasicAuth +ExportCertData +CompatEnvVars +StrictRequire
<Files ~ "\.(cgi|shtml|phtml|php3?)$">
SSLOptions +StdEnvVars
</Files>
<Directory "/usr/lib/cgi-bin">
SSLOptions +StdEnvVars
</Directory>
# SSL Protocol Adjustments:
# The safe and default but still SSL/TLS standard compliant shutdown
# approach is that mod_ssl sends the close notify alert but doesn't wait for
# the close notify alert from client. When you need a different shutdown
# approach you can use one of the following variables:
# o ssl-unclean-shutdown:
# This forces an unclean shutdown when the connection is closed, i.e. no
# SSL close notify alert is send or allowed to received. This violates
# the SSL/TLS standard but is needed for some brain-dead browsers. Use
# this when you receive I/O errors because of the standard approach where
# mod_ssl sends the close notify alert.
# o ssl-accurate-shutdown:
# This forces an accurate shutdown when the connection is closed, i.e. a
# SSL close notify alert is send and mod_ssl waits for the close notify
# alert of the client. This is 100% SSL/TLS standard compliant, but in
# practice often causes hanging connections with brain-dead browsers. Use
# this only for browsers where you know that their SSL implementation
# works correctly.
# Notice: Most problems of broken clients are also related to the HTTP
# keep-alive facility, so you usually additionally want to disable
# keep-alive for those clients, too. Use variable "nokeepalive" for this.
# Similarly, one has to force some clients to use HTTP/1.0 to workaround
# their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
# "force-response-1.0" for this.
SetEnvIf User-Agent ".*MSIE.*" \
nokeepalive ssl-unclean-shutdown \
downgrade-1.0 force-response-1.0
# Per-Server Logging:
# The home of a custom SSL log file. Use this when you want a
# compact non-error SSL logfile on a virtual host basis.
CustomLog /var/log/apache2/ssl_request_log \
"%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
</VirtualHost>
#-------------------------------------------------------------------------------
